Quote:
Originally Posted by Stan Hillis
That's the part that's buggin' me. I've never shot a gun that shot flat for me when I was looking down on the rib. But, rules are made to be broken. Now, I'll start second guessing myself when I pass on a nice shotgun stocked high for the traps, or such. Livinlearn. 
Pitch plays into it too, Harry. |
It can happen though. Just out of graduate school in 1972, I traded an Ithaca M51 Trap with a sawed off barrel (cousin's wife's gun that she shot at a dove with a corn stalk in the barrel) for a 1948 Ithaca 16ga field grade with a high grade stock (finishing up guns with available parts). I had been thinking of a classic double and they were cheap at the time. Took it out for its first trip and hit not one thing. I patterned it and both barrels were dead 18" high at 30 yds. This with a gun with 2-3/4" drop. It also had very light barrels. I thought a little and took a towel and wrapped around the center of the barrels. I was at an abandoned concrete plant near my house found a tough looking small tree that hat a vertical narrow V fork in a low limb. I put the barrel with the towel in the fork and bumped it hard on the top of the action. Three tries at this and it patterned perfectly. With light barrels it is easy to bend a set of doubles up or down. This went on to be my lifetime regular dove gun.
I knew nothing of Parkers at the time and hadn't seen pictures of them truing barrels in the factory. What prompted me to try (besides money) was I had a Weatherby gun catalog that showed a picture of a worker truing rifle barrels in their German factory. I figured if you could bend and adjust a rifle barrel in a press with a 4" handwheel crank, bumping a shotgun barrel enough to get a pattern right should be easy.
The same wouldn't work, of course, if you start with a straight barrel. Then the pattern would depend on distance.