View Single Post
2 1/2 from 2 3/4
Unread 10-20-2024, 11:53 PM   #8
Member
Rob Lewis
Forum Associate

Member Info
 
Join Date: Nov 2015
Posts: 3
Thanks: 0
Thanked 3 Times in 2 Posts

Default 2 1/2 from 2 3/4

Quote:
Originally Posted by John Devin View Post
I will get the BP Advantages Manual. The other guns are English made shotguns. I and pretty sure they are both 2 1/2 inch chamber guns, but will double check. The 2 3/4 inch 12 g load (Cheddite plastic hull, Cheddite 209 primer, 16.4 grns Perfect Pattern, 1 ounce 7.5 lead shot, CB-6100 wad, 1/4 inch felt wad (under plastic wad) with an over powder card) shoots and patterns reasonably well in my Parker GHE. It is under 6000 PSI. Now I am looking for a low pressure load for the 2 1/2 inch Cheddite paper hulls. I will try the suggested manual...
Hi John, I would use the Perfect Pattern load you list all you have to do is use a trimmed 2 1/2" cheddite case then leave out the "1/4 inch felt wad (under the plastic wad)". You should expect the same performance as the 2 3/4".
Rob Lewis is offline   Reply With Quote
The Following User Says Thank You to Rob Lewis For Your Post: