Issues
I’m a little suspicious about the screw that goes through the top strap, through the wrist and screws into the trigger plate. I have a notion that this screw is probably supposed to be a tight fit because it has a lot of important work to do, but I don’t like the way the threads look, and they don’t screw into the trigger plate easily when not under stress.
I was able to remove the broken firing pin from the right side because I was able to unscrew what I’m going to call the nipple on the right side. However, the nipple on the left side won’t budge and I’m reluctant to force it. I will need a set of firing pins.
Finally, the breach end of the barrels are loose on the face.
Of course, this is all I was able to come up with using my untrained eye.
Please feel free to correct me on my vocabulary, and to otherwise set me straight on anything you see here. I’m grateful to benefit from the wealth of experience here.
|