Thank you William!
I dont have any loads for 2 3/4 specifically. I just put a short kit on my Mec and cut everything down to 2.5. I have an original 3 chambered damascus gun and it eats up the 2.5 all the same. I would assume that with the Z21 wads would work with the same powder amounts in a 2.75 hull versus a 2.5 hull as the wad compresses a bit once crimped. And in theory, with slightly less pressure on the powder from the wad being compressed down 1/4 less in a 2 3/4 hull, I would assume pressure would remain around the same or even a little less. But I could be wrong, maybe someone on here has some experience with loading multiple length shells?
|