Remington CrMo Barrels - Bore Size and Taper
I searched for topics on the question below hypothesizing about bore diameter on Remington-made CrMo barrels. I found none.
I have found multiple examples where bore diameter in CrMo barrels have been significantly larger than nominal. My examples are mostly 16 gauge and have measured at .675-.680 (nominal is .665). I am not talking about the gradual taper from Chamber/FC. My measurement for the bore is taken at 9" from both muzzle and breech. Chamber, FC, Chokes seem to be unaltered.
Have others found this to be true of the Remington-made CrMo barrels?
Best - Dean
__________________
Follow a good dog while carrying a fine shotgun and you will never be uninspired.
|