Quote:
Originally Posted by Mike Koneski
Jerry, those spacers will not work on the progressive presses. The turret revolves with each pull of the handle to advance the hulls. Those spacers work on the 600 Jr because you are manually moving a single hull from station to station.
|
Mike,
Yes, I have four 9000 so this is why I am sure it works. What I wrote is when the shell gets to the first crimping station, pull it out and put the spacer under it. It will follow the shell until the end when it is ejected. Thus one would need to rotate three of them in the three final stages as the machine progresses and ejects the shell. Pull the spacer and put it on the next shell at the crimp station. The shells are easily pulled there at the first crimp station, the spacers fit the shell and the MEC firmly, and should work if the 28 gauge spacer can be made.