Quote:
Originally Posted by henderson Marriott
While AH Fox never made a 10 ga frame, the appearance of a full sized Super
Fox with weight in many cases in excess of 9 pounds-led such writers of the 1920s as Askins and Buckingham to label the HE as approaching a 10 gauge frame size.
|
You often write glowingly and with tidbits of info on Super-Fox guns; perhaps you can provide the references by Askins and Buck to the frames and to that effect? What I've seen are period comments relating to the earliest barrel caliber, i.e., nominally .748/750", which approached 10-gauge
bore sizing (actually about 11-gauge). Most Super-Fox frames were made from from 12-gauge frame forgings but machined with somewhat wider width across the breech balls and also at the back end of the frame where it abuts the head of the stock. I wrote "most" because some small number of Supers were "ordered light" and were made up on regular machined frames and running as light as ~ 8-1/4 pounds. For anyone interested and wanting to get into the lore of Supers, it would be well to refer to the index of Super-Fox articles in the DGJ that's on the paying members part of the Fox Collectors forum; plenty of good reading and tech info therein. frank