Thanks for posting these Steve. I have really been thinking about a Parker 410 for a while, it almost seems like now or never with the way prices are going. It would be a sell 5 or 6 guns for 1 proposition for me, but I might be okay with that. I should say I have a Citori 410 that has just been wonderful, and shoots better than it should for a 410. Having said that I really would like a Parker 410. And I would agree with Edgar that you can do so much more with a 28ga., but I am still mesmerized by the 410 for some reason...
On the two guns posted the first one has a recoil pad, which I am assuming was added to increase LOP, however I would think that would hurt desirability/value unless it was ordered that way. It just doesn’t look right on a 410.
The second gun seems to have the non-spurred flat buttplate, which I just found out was typical for these at the time. Also the second gun is listed with 3 inch chambers, but was made in 1928. From what I have read they should be 2 ½" as the 3” inch shell was introduced with the Winchester Model 42 in 1933. I read this in a post that Dean Romig started:
https://parkerguns.org/forums/showth...&highlight=410
Is the desirability and/or value affected by lengthening the chambers in that gun?
While a 3 inch gun would have more versatility, I would think lengthening the chambers would affect value and possibly safety on the lighter 000 frame, but I don’t really know. I think you could play around with the loads and shot in a 2 ½’ gun to make it work in most situations you would use a 410.
Any thoughts on the above would be appreciated.
Thank you,
Jay