View Single Post
Unread 12-25-2021, 12:27 PM   #11
Member
Milton C Starr
Forum Associate

Member Info
 
Join Date: Jun 2019
Posts: 1,509
Thanks: 476
Thanked 1,009 Times in 466 Posts

Default

Quote:
Originally Posted by Bill Murphy View Post
Milton, did you make that sizing die? Is it something a machine shop can easily fabricate? I've been loading eights for 53 years, but have never gotten to the point where I had to resize. I think I'm there now, because my brass empties don't fit in all my guns.
Wayne Goerres had this one made, or maybe he made it himself I cant remember. I think the basic idea is you just need a machine shop to bore a hole into a piece of metal the diameter you are wanting your cases sized to. If those brass cases are tough you would might want to have several dies made and do it in gradual increments as not to crush the brass I would think. Its 2" in diameter and 3.5" long. Which I think is perfect as it being slightly longer than the case protects the mouth when resizing. I then flip the die upside down and just press it out with a 3/4" wood dowel cut to just long enough to fit under the arbor press. It resizes them from .940 -/+ down to .924 in one press.

Last edited by Milton C Starr; 05-13-2025 at 06:46 PM..
Milton C Starr is offline   Reply With Quote