I think the gun was assembled when the damage occurred. Damage to the receiver would indicate the gun being assembled. I believe foreign material became wedged between the left ejector and the retaining plate. Since the mechanic couldn't open the gun and find the problem, he/she decided to apply pressure to the left ejector since it refused to move and decide a ballpeen hammer and punch would do the job. Obviously they were able to remove the barrels after applying force. Enough force was applied to break off the screw head for the retaining plate and destroy the left side of the dollshead. The gun can be totally restored without replacing the dollshead but require an adequate supply of disposible income. Removing the retaining screw would have allowed them to remove the barrels.
|