Jeffery, other than a pin centered good enough in a wooden dowel for depriming, all you'll need is a dowel to push wads down and a glue gun. For seating the primer I just set one on a piece of metal flat stock, put the shell on it with a dowel in it to wack with a hammer. You'll also need a little stand or a hole drilled in the work bench for the primer to drop into when depriming. Wads for brass shells can be bought from BPI or circlefly.com. They need to be one size larger because the brass is thinner than a regular paper or plastic shell. Use only fiber wads for BP. Good luck.
__________________
Paul Harm
|