[RiccO]

Hi,

I have on hold an 1887 grade 1 Parker hammer gun. The frame size is #1 and the bbl's are laminated steel. Was curious as to the chamber length (i.e. 2 1/2
2 7/8, 2 3/4 etc.) and what factory shells I can use to try it out. I do some shotshells reloading for 28g but not much as I mostly shoot trap and the 12g factory loads can be had relatively cheap in bulk. I will probably start reloading for this particular gun down the road. Any info is greatly appreciated.

Thanks

RiccO