Quote:
Originally Posted by Dave Noreen
The WAA16 wad, now available as the CB0100, was originally intended for the Winchester/Western compression formed 16-gauge hull (Super-X, UPLANDER and DOVE & QUAIL) with tapered side walls, not the current straight sided Olin trash hulls.
Attachment 85708
Attachment 85709
How is the powder migration issue?
I'm still loading my supply of the compression formed 16-gauge hulls with the load that sports the * in the Ball Powder Loading Guide -- Win 209, 20 grains WSF, WAA16 wad and 1 ounce of shot. When Olin quit making the WAA16 I cleaned out Green Top Sporting Goods entire supply. Just about the time I was running out Clay Buster came to the rescue.
For 7/8 ounce loads I'm using the Down Range DR16 in Federal hulls. |
When Winchester first made the WAA16 available to reloaders i used almost three cases of them up in about two years . I also back then I hoarded the Upland hulls and later the Xpert hulls as if I’m not mistaken they were the same hull . You cleaning out Greentop explains why I couldn’t find anymore as all I used had come from them . I shot up a fair amount of WSF back then in 16’s and 20’s . When in their infinite wisdom WIN saw fit to do away with 473AA I switched to WSF for 20 gauge Skeet loads and of course the 16 loads .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
|