Some idiot staked it in place with a punch. They must have thought it needed to be set and regular thread locker would not work. Or maybe the screw is stripped?
This was completely futile since the screw CANNOT back out because the frame stops is from loosening when the plate is installed!
Sometimes you just want to shake people...
Anyway, if someone ever wanted to get the screw and the slide out, it will be a complete bear. The screw will have to be drilled out and the hole re-tapped.
That slide sticks out a bit farther than the frame than it should be by the way. It should be flush with the trigger plate dolls head so that it does not get in the way of seating the plate.
__________________
B. Dudley
|