Quote:
Originally Posted by Harry Collins
Craig,
If I remember correctly, Ross Seyfried used H4198 as a substitute for BP. His formula was 40%-46% of the Black Powder charge with a compressed Dacron polyester filler. He cautioned against any other filler such as serial, plastic, or foam.
Harry
|
I’ve never been much of a fan of H4198 , well that was until I started using it in my Remington ML . I used to have a BallistiCast 462-550GC mold that I used in a 45-70 lever action . I had a couple folks suggest loads to me using H322 and RL-7 . I also had a BRP 462-465GC mold that I pushed hard with H322 in a leveraction Marlin . The 465 grainer was very accurate and a relatively practical bullet for my use . The 550 grainer shot very well but not as well as the 465 also obviously the size of the bullet inside the case hurt your powder volume a bit much . While I would be fine for deer elk moose and blackies I don’t think it would be my choice for a big brownie in a 45-70 . That 465 grainer with a bit tougher alloy going as fast as possible and still being inside 2 MOA would be my choice if carrying the lever gun . Personally I’d rather have a 375 H&H for big Brownies on Kodiak .