View Single Post
firing plunger length
Unread 11-04-2019, 07:16 PM   #13
Member
Seth Mackay-Smith
PGCA Member

Member Info
 
Join Date: Feb 2019
Posts: 39
Thanks: 15
Thanked 24 Times in 10 Posts

Default firing plunger length

Quote:
Originally Posted by Bruce Day View Post
...replacement plungers are available , I suggest you remove yours, measure them and publish the length here. Ask others to compare theirs to yours to determine if yours are too long or if something else is amiss.

If yours are too long, although hardened, they can be ground to proper length. I do not know how they could be too long unless these are incorrect replacements.
With a replaced battery, the calipers work much better. Sometimes I miss verniers. At any rate:

My plungers are .992" OAL. They stand out just over .170" from the breech face with the plungers fully depressed, if that means anything.

What length should they be/do others have? (I'll post on the hammer gun forum as well)

Thanks,
Seth
Seth Mackay-Smith is offline   Reply With Quote