20ga. low presure load
[
This load was published in the LYMAN Shotshell Handbook 2nd Edition:
Hull= Winchester AA 23/4", Shot=7/8oz.,Power=GreenDot 14.5 grs., Primer=CCI 209,Wads=Winchester WAA20,
Velocity= 1150 fps, Pressure (L.U.P.)= 8,960.
I have been using this load for years and find it to be a very good and effective load.
QUOTE=chris dawe;240403]Guys I recently came across a post on another forum demonstrating how to make short chambered shells out of factory loads ,using an appropriate sized diamond hole saw to cut out the factory crimp and replacing it with an overshot card ...sure makes access to short shells easy in place like where I live -where everything has to be brought in by boat or plane.
My question is that I know I seen mention of particular factory 20 gauge load pressures somewhere but just cant find it ...I know some of this factory stuff can run a little hot ,my bigger lefever 12 gauges and 2 frame Parkers offer no concern -but I shoot some little 20 bore guns that I would hate to stress[/QUOTE]
|