I was given a copy of a post from this forum from 2007 I believe. It was supposedly the original mix that was used at the Parker factory. Some refer to it as French polish. Use a container of choice, I use an 8oz. jelly jar. The mix is one (1) inch of Zinnsers Bulls Eye Amber Shelac and 1/8 of an inch of boiled linseed oil. You can also add two drops of Japanese drier but I don't think it is needed. Mix well and apply with soft cotton cloth. Dries very quickly. Apply as many coats to your liking, fine steel wool between coats if you prefer. I used this on all three of my Parkers as you see in the pics. From left to right, 1901 vintage VH and also where credit is due, checkering recut by Brian Dudley, Center 1884 vintage Grade 1 hammer, and 1891 vintage GH.
|