Looks like the short Mec is going to do fine.
I have about 500 once fired in a pump black 16 g Remington hulls. Last night cut one just ahead of the brass and compared to a chut Cheddite. Both straight walled, Remington side wall thicker. Base inside is higher than the Cheddite. Most data shows about 1/2 g less powder in the Remington's probably due less internal capacity. Trimmed one down to 2 9/16 and loaded, perfect crimp.
Taking the Remington 31 and a Cronograph to the club range this week Cronograph and pattern short and long , Cheddite and Remington 3/4 oz, fold and roll plus some spreader loads. I need to settle on 3 loads before nice weather gets here. 7/8 3/4 and a 3/4 short spreader I can use in any 16. The 7/8 and spreader are already good, if the short 3/4 proves ok will load & shoot and forget about experiments until next winter.
William
|