Quote:
Originally Posted by Carl G. Bachhuber
Of late I have been using Schoeller PT1044 wad plus 3 16ga. .125 card wads with my 1-1/8 oz loads in Remington SP10 cases cut to 2-7/8. These cases do seem prone to buckling if not supported during crimping. Once they buckle they will continue to do so.
C.G.B.
|
If you are using a MEC reloader and your hulls are buckling you need to make an adjustment to the cam. I was loading Federal hulls for a long time without issue and when I got some Remington hulls they buckled upon applying the final crimp. Once I adjusted the cam the Remington hulls loaded perfectly.
https://www.ballisticproducts.com/bp...ust/mecadj.htm