View Single Post
Unread 07-16-2016, 04:47 PM   #7
Member
J.B. Books
PGCA Member
 
Pete Lester's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 3,064
Thanks: 1,870
Thanked 5,455 Times in 1,520 Posts

Default

Thanks for sharing the results of the testing with us. Both Green Dot and Unique are good powders for use in the short ten. Interestingly enough I have used 27 grains of GD with an SP10 with quarter inch of filler wad for 1 1/4 ounce lead loads in the Federal hull. I will update the short ten reloading data sheet with this info.

Quote:
Originally Posted by Mark Garrett View Post
Had a couple 2 7/8" 10ga loads tested by Tom Armburst

10ga Rem Hull cut to 2 7/8"
Win 209
24.5 gr Unique
Rem SP-10
Nickle Plated #1 Buck -16 stacked 2x2
26 grains PSB buffer + Tightseal on top
6 fold Crimp
1188 fps, ev 12 - 8666 psi ev 700

10ga Rem Hull cut to 2 7/8"
Win 209
27.0 gr Green Dot
(1) .125 NC 40lbs wad pressure + (2) 1/2" Fiber + (1) OSC ( all 10ga)
1 1/4 oz #7.5 lead
6 fold Crimp
1204 fps, ev 11 - 7233 psi ev 400
__________________
Progress is the mortal enemy of the Outdoorsman.
Pete Lester is offline   Reply With Quote
The Following 2 Users Say Thank You to Pete Lester For Your Post: