big ten that is some nice equipment you have theresure beats my old ten ga hand loader this is what i use...for resizeing the hulls i use one that wayne gorez gave me thesketches and measurements to build.you can press down and on the next stroke push it out...yes the once fired hulls do give problems especially the black hullell remingtons..when they are shot in kiln guns for some reason the last 1 inch of the shell is burned and the case mouth shrinks makeing it almost impossible to load with a plastic wad or a paper wad..but by slitting the mouth about 1/4 inch down across the hull mouth you can load it...i buy new hulls at times when i can get them but lots of times i m lucky to just get once fired hulls... i toohave bought from precision but my old computer is so old it want bring them up...balistic reloading has wads both plastic and paper but no hulls have they had in a long time.. wishmy old fa loomis looked as good as yours it has 36 inch barrels 4 inch chambers and also weighs 15 lbs loaded... thanks for showing us this nice loaders and equipment...your loads look like factory to me...i too recommend tom arbrusts book ihave about wore mine out looking at it..have killed deer with the 8 ga parker lifter gun a doe with a load tom arbrust loaded me up with buckshot and with the pumpkin ball load i made myself...tell you what a nice fellow tom armbrust is i asked for about 4 boxes of shells well he sent them to me and lots of info on the 8 ga. i had not sent him any money yet yet he sent the shells real quick....i paid him after the shells were sent....he also said i was the first person to ever ask him to load up buckshot in the 8 ga...thanks for everything charlie...
|