Parker VH
Yet another question--my first Parker was a 12 ga. VH that had some minor pitting on the side plates and a scratch on the bottom plate. I used 800 grit followed by 2000 grit emery cloth plus many hours of work to remove 95% of the pitting and the scratch but now it looks like a nickel or chrome finish which i have learned is not the desired status. Is there a simple way to return the finish the "normal" devoid of case coloring finish; simple is defined as something an unskilled person like myself can pull off. Thanks in advance for your help.
P.S. I think it is so very helpful to have access to a whole list of experts to ask questions to and receive first class advise. Bill
|