Thread: Hammer Question
View Single Post
Unread 04-03-2014, 01:20 PM   #5
Member
B. Dudley
PGCA Lifetime
Member
 
Brian Dudley's Avatar

Member Info
 
Join Date: Aug 2011
Posts: 11,073
Thanks: 531
Thanked 19,764 Times in 4,983 Posts

Default

Double check the issue.
Remove the screw and move the hammer and see if it is moving on the tumbler shaft. If it is, then it is the issue I described above. And of this is the case, the hammer should come right off the shaft with no effort.
If the hammer is snugly the shaft and there is movement of both the tumbler and hammer then something may be broken or tweeted inside the lock mechanism. The hammer should be firm at the "safe" half cock position unless it is pulled back against spring pressure, or GH trigger depressed and pushed forward.
__________________
B. Dudley
Brian Dudley is offline   Reply With Quote
The Following User Says Thank You to Brian Dudley For Your Post:
Visit Brian Dudley's homepage!