Quote:
Originally Posted by Grantham Forester
Mr. Romig- I have a 11 gauge (I believe it to be) Parker Lifter SN 1346 and all the numbers match every where so marked on the gun as I have dis-assembled it-- The frame is marked on the left barrel flat (water table) as follows- lower cased capital B followed by the 4 digit serial number is slightly larger case numbers- could this the next size up from the No. 3 at 1 &3/16" between centers- as mine measures an even 1 & 1/4" on the same- also, did the frame sizes on these earlier Parkers move an even 1/16" as you progressed from on size upwards to the next-- = The Barrels are marked in flowing script on the top rib, closer to the breech- Parker Bros. Makers, Meriden, Connecticut U. S. A.-- on the bottom of the left side barrel near the breech and lug- on the underside-- 11 over a capital letter D-- opposite to that, on the right barrel underside- is a shield with the smaller case letters looks like p and d- somewhat blurred- and below that in larger case and F--thanks GF
|
Grantham,
What.size are the chambers, and what weight is your Parker.
Will you have B1346 at the Southern? I would love to see it.
Richard