Scott, the only problem you may encounter, presuming every other aspect of the barrels is a good fit to the frame, is that the wear plate area of the lug will likely need some fine filing so that the lever will come around into an acceptable 'closed' position. Or it may need to be welded up and then filed.
I just completed fitting a set of 2-Frame 10 ga. Damascus barrels to my 2-Frame 12 ga. DH and I used the smoke method of determining the high spots that needed to be very carefully filed. I'm glad I brought it to David T. to get me started in the right direction with fitting these barrels.
|