screws visible
When the gun is open, look on the left side of the lug closest to the hinge pin and you will see s screw about 5/16" in diameter that holds the cocking hook. Hold the gun open as far as it will go and remove the screw if there is enough room. If the screw will not come all the way out, use a small pin punch to tap out after all the treads are free from frame. There will be three parts the release, the cocking hook, the screw, and a plunger spring with tip. Don.t loose them. Then the barrels should release easily. Do all this with the fore end off the gun and over a table. Jim
|