Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   How to tell if a barrel is Damascus (https://parkerguns.org/forums/showthread.php?t=9636)

Mike Franzen 02-14-2013 05:55 PM

How to tell if a barrel is Damascus
 
Is there a test I could perform to tell if barrels on a gun are Damascus? The barrels are blued and appear to be steel but a gunsmith looking at them said they might be damascus.

Chuck Bishop 02-14-2013 06:37 PM

First, what does the rib say, assuming it's a Parker? Second look for wear under the forarm. Get a good magnifying glass and look real close. Examine all parts of the barrel including the barrel flats and ribs. There may be a chemical or other means but I'm not certain of that.

You could always send me the S/N or look it up in the Serialization Book if it's listed.

Steve Huffman 02-14-2013 06:54 PM

What are the marks on the barrel flats ?

Drew Hause 02-14-2013 07:05 PM

Dab a bit of white vinegar on a soft white cloth and rub an area underneath the forend (where it won't show). The blue should fade and a pattern appear, but keep that area well oiled thereafter or it will rust.

Here's a blued GH with 'D' on the flats and the crolle pattern visible

http://pic20.picturetrail.com:80/VOL.../340516041.jpg

Mike Franzen 02-14-2013 07:13 PM

I'm Sorry Chuck, the gun is not a Parker. I should have clarified that.

Brian Dudley 02-15-2013 02:47 PM

Usually you can look at them in the light and at the right angle, the pattern can still be made out. If it is not a set of factory parker barrels and the rib is not marked.


All times are GMT -4. The time now is 03:03 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Parkerguns.org