Skeleton Buttplate 20 gauge size
 

If anyone has one they can measure I'd appreciate it. Also, were the skeleton buttplates the same size on the two different 20 gauge frame sizes?

Hi Tom, any frame size other than the 0-frame for a 20 gauge would have been a specialiy ordered gun... what other 20 gauge frame size are you referring to?

Ah, the rest of the story. I found the Skeleton Buttplate from s/n 177244, which the serial number book lists as a DHE 20 gauge with 32" barrels. Rare bird and I'm thinking this might have been one of the ones that went to California to hunt ducks back in the day. Accordingly, I thought it might have been built on a 1 frame because that was (I believe) and option.

I hope someday you find the skeleton buttplate from Rear Admiral Thos. Perry's DH 20 ga. ;)

Size"??
 

Jent,
What's the size of that skeleton? Mine is 5 1/8" x 1 5/8".

The Brothers P did many wonderful things to achieve a customer's desired weigth and balance with their guns. Quite often two guns of the same frame size will different sized stocks. As I recall, back in the day, when Kevin and I made a lightning road trip up into Pennsylvania to lay his "Grandma's Gun" next to one of its sisters from that little nest of four 0-frame, 28-gauge, Damascus barrel, GH-Grades, one gun had a decidedly larger stock than the other. Unfortunately, this is the only picture from that family reunion I have scanned in and it doesn't really show the difference very well.

http://img.photobucket.com/albums/v3...dHerSister.jpg

I can measure the skeleton butt plate from my Dhe 16 O frame if that would help. Isn"t that Don Miller from New Wilmington,Pa in the picture? He has not shown me that gun when at his house. I recently lost my old English Setter, Speck, that I bought off of Don--and he hunts a dog he bought off of me.

That would be great to know. Thanks

The overall size of the butt end of the 20 ga. stock as oppossed to the 16 ga. in the "0" frames were significantly different with the 20 ga. being smaller. I found this out when trying an "0" frame 16 ga. butt stonk on a 20ga. frame. The head matched up but the butt plate from the original 20 ga. stock was too small. Jim