Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   DHE 12 ga. ? (https://parkerguns.org/forums/showthread.php?t=6388)

Steve Galehouse 02-13-2012 10:52 PM

DHE 12 ga. ?
 
7 Attachment(s)
Hello everyone-

I inherited a DHE 12 ga. frame size 1 1/2, serial # 127506. I was hoping someone could give me input as to its condition and value. I've attached some photos.

Thanks, Steve
Attachment 13698

Attachment 13699

Attachment 13700

Attachment 13701

Attachment 13702

Attachment 13703

Attachment 13704

Dean Romig 02-13-2012 11:19 PM

Hi Steve! Welcome to the PGCA forum!

That's a very nice DHE and if very nice condition.

It's difficult to determine if it is in original condition but from here it looks like an extremely fine refinish - judging by the condition of the barrel blue vs. the nearly gone case colors.

A DHE in that condition and configuration should be in the $5K range in today's market.

You should buy a $100 PGCA Research Letter for that wonderful Parker or join the PGCA for $40 and buy the research letter for the Member's price of $40... a total savings of $20.

Justin Julian 02-13-2012 11:25 PM

That's a fine looking gun. In the 3rd photo down from the top, it looks like the top sighting rib has been cut and rejoined about an inch from the breach....is that the case? If so, a non-original alteration of that nature could knock the value down significantly.

Steve Huffman 02-14-2012 05:20 AM

Justin, Look close at your Parkers rib it will have that also.
Book has it having 28 " barrels . Nice gun Steve.

Pete Lester 02-14-2012 05:34 AM

Is there a silver oval shield in the stock? I think I can see it but not sure with the angle of the picture and grain of wood.

Dean Romig 02-14-2012 06:06 AM

All Parkers with the doll's head have that joint. The doll's head section is attached with a screw as well as with solder.

Steve Huffman 02-14-2012 06:38 AM

Steve, I looked up your serial number again and it shows that your gun does not have ejectors book has been wrong before, so you might double check. The E on DHE stands for ejectors.

Steve Galehouse 02-14-2012 10:04 AM

5 Attachment(s)
Thanks for the welcome and all the replies---I will be joining the PGCA.

I've attached a few more photos; I think it is an "E", unless extractor and ejector mean something separate. Also the is an oval metal shield along the bottom of the stock. Thanks again for all your input.

Steve
Attachment 13705

Attachment 13706

Attachment 13707

Attachment 13708

Attachment 13709

Pete Lester 02-14-2012 10:09 AM

It's a DH rather than a DHE. Ejectors will kick the empties out of the gun and throw them over your shoulder. Extractors pull the empties out so you can remove them with your fingers. A very nice gun, but the lack of ejectors lowers the anticipated value significantly over an ejector equipped gun all things being equal.

I wish I inherited or would inherit such a nice gun! Congrats.

Steve Huffman 02-14-2012 10:25 AM

Barrels look redone as Dean has said the extractor is blued as for the face of breach & dolls head also.Still a nice gun.


All times are GMT -4. The time now is 05:07 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org