20 ga hammer gun barrels
 

I took these with a I-phone, not real good but here they are.

Those barrels have such a heavy wall, it would seem that the blanks were done before it was decided to bore to 20ga. so probably have outside dimensions of a 12, maybe 16.

I noticed that also. Gary,tell use about the barrels. Is there much swamping to them or are they pretty straight? What does the gun weigh? Thanks..

Gary, that gun is a sweetheart! I'm thinking maybe a 1-frame?

But then, Austin has a 20 gauge lifter made on a diminutive frame size heretofore not known to exist.

Here is some more info It is a 1 frame 1=1/16 between the firing pins. I have the info that Brad gave me when he did the barrels I could not get the gauge that I bought from Dave Purnell to go in the barrels, any way Brad's measurements, all that I have. Wall thickness .035 both barrels, 2-3/4" chambers, bore right barrel.621, left barrel .615. All this info will be in my article in Parker Pages, and much more that will answer I am sure other questions. Hope to have it ready for spring issue. One other thing there is some swamp in the barrels as you would expext from a 1 frame twenty, Remember this was at one time a 2 barrel gun these barrels are the from 1900 as per the order then,

By the way if any body out there has the set of barrels for 4634 I will pay a premium for them, but again fat chance that will happen I'm out of here got to blow leaves!

20 ga
 

TTT

gary what ga is the set of barrels you are looking for..just wondering...wish i had this set of barrels i would give them to you where those sister barrels could be together again...this is a very special gun...charlie

20 gauge 28" Damascus, 1 frame, Wish I could find them, Gary