3 piece barrels?
 

Take a look at this monster. I clearly see sleeve lines forward of the chamber but it also appears to have another set of joints just forward of the fore arm Say it ain't so! https://www.gunbroker.com/item/1192279935

:rotf:, That gun has been up for sale on GB for months ! Doesn't seem to be much interest !!!!!!

The breech end is clearly Damascus and stamped so on the right barrel flat. The rib says Titanic Steel which wasn't introduced until 1897 and that is an 1892 gun judging by the serial number.
Screw-in chokes though...???
Restocked in California claro it looks like.... Think I'll pass.





.

I only see one sleeve joint.

There are 2 joints Brian.

Picture 3 of 19 and also 9 of 19.




.

No there is only one joint just forward of the hinge pin. where have you ever seen ribs marked Titanic in front of the fore end?

This one is from picture 3 of 19.

.

And this one is picture 9 of 19.

.

9 of 19 is just a different view of the area shown in 3/19

I disagree Edgar. You can see the forward part of the BTFE on either side of the barrels in 9 of 19.





.