Cowboy BP 8 & 10 loads
 

What is the outside diameter 8 ga shell? A friend named Ed hubel designer of the from hell series of cartridges. Said that he bored 10 ga barrels with breech outside diameter of 1.2" to 8 ga industrial and run those modern thin barrels up to 22,000 psi without pressure problems.he said he had or it is possible to build a.monblock for a 10 ga sxs.frame and use non taper straight walled 1.2" 8 gauge barrels and would last forever.running in shotshell psi range. Bit off topic sorry. Lol. I seen that tom armburst experimented with tungsten matrix in the 8 ga with bluedot powder 46 grs I think with 2 1/4 oz at 1250 fps with 10,800 psi. Now I also read of short 8 ga 2 9/16 made by boss thayt could handle only 1 1/2 oz of shot. I talked hellis about the 8 ga they said a square load in the industrial shell would be 2 oz or so they recommend. But from the factory remington loads them with a 3 oz zinc slug. Oh does any one know what psi the factory loaded winchester 8 ga shells run at? I think there probably some crazy.psi sense there milk guns weigh 100 kilos

Milton,

The Rem's are about .945 on the ring. After that's milled and slipped off, 'tis down to .917 + -, which chambers in the 1883 gun. I won't cross my own line in the sand by using smokeless in one of these old dogs (a compatriot, familiar with BP, loaded smokeless one night and double charged a round and blew up a perfectly good buffalo gun.:shock: Lived (real lucky) to tell about it!!!).
3 oz. zinc?!? Sounds like your speaking of the klinker guns. Found them on line, still made. A single barrel pedestal gun, with shield, fired with a lanyard. I'll stick to shoulder guns.

Thanks for the come back.
Best,
DD

Good thread Ron. I've been experimenting with my new 10 ga as well lately. It's a #3 frame D grade hammer gun with .793 bores, choked full and full. I turned out some brass, thin walled 2 7/8" hulls at work, and have been working up some black powder loads for waterfowl. My best loads are 4 1/2 drams of FFFg Goex with 1 1/2 oz of buffered bismuth, in sizes #1 and #4. I use 9 ga. card and felt wads. For #4 shot I load one 1/8" hard card wad, one 3/8" felt wad, and one 1/4" greased felt wad with a overshot card between the greased wad and shot. The over shot card is glued on with Duco cement. With #1 shot I have to replace the one 3/8" felt wad with a 1/4" felt wad to get everything to fit.

With this configuration my right barrel patterns 78% and the left 76% at 40 yards. After reading about Sherman Bell's testing with blackpowder loads I'm taking an educated guess that my velocity is around 1250-1300 fps with these loads. Switching to Swiss instead of Goex powder would increase my velocity and pressure, but may diminish my patterns, more testing is necessary.

Keep experimenting with powder, shot, and wad configurations, one of them with be the "magic" one. Sometimes it seems light loads can be a little more finicky for some reason. It probably has to do with how the added card wads react with the shot column. Best of luck to you.

I just mentioned the 3 oz load because I heard Mr Charlie say he shot them in his parker lifter plus I think that's what the sp8 wax was designed for. Also I found a picture of a greener 8 ga I think its similar to the one tom armburst has. Your lucky you got a 8 ga. I can't seem to find one in my price range . Though I have thought about loading for my 10 ga though I can't find the shot I want.

If all things being equal loading up 4 drams of BP, 1 1/4 oz of shot in a 10 gauge shell, does anyone know how much increase in pressure using Swiss powder compared to Goex?

I use Goex FFg for 10 and 12 gauges. Heard good things about Swiss but the lack of data information of how much change of pressure keeps me from loading them in my old guns.

I have a Ferguson breech loading flintlock rifle that I have experimented with Swiss powder. At 100 yards switching from 3F Goex to 3F Swiss will raise the point of impact of the ball by 9 inches. I need to borrow a chronograph to find out what the actual change in velocity is, but just going by trajectory, it is significant. The Ferguson has a small powder chamber (about 60 grains) so pressure concerns are not really a factor in this rifle. I am somewhat hesitant to throw 4 1/2 drams into my 10 ga. without knowing what the exact difference in PSI is.

I have been told several times that sporting powders in the late 19th century were "hotter" than the standard Goex we have today. Swiss powder is supposedly closer to the old Curtis and Harvey sporting powders, but without knowing for sure about pressures I am somewhat hesitant to try it. The Goex performs so well in my gun I don't know if it's worth the trouble (and expense) to play around with Swiss in this specific application. Does anyone know of someone who will pressure test 10 ga. 2 7/8" brass hulled, blackpowder loads using 9 ga wads?

the 8 ga is a a very fine gun.. the difference between a 8 and a ten is the same as a 10 to a 12...each gun has its on merits but guns are kinda like cubic inches in engines the more the cubic inches more power can be made...so larger the ga the more powder and shot can be used...but alast guns are like engines they will also blow up...so the need for a good set of strick rules are needed for the loadings of each of our beloved old guns... and yes i have fired 3 ounces of shot through my old parker lifdter gun but not many of them but have shot close to a 1000 rounds now of loads from 1 1/2 ounce to 2 1/2 ounce in the old parker but i used tom arbrust loadings to a tee... the 3 ounce loads came from another shooter of the 19 th century and his gun was a english built greener...i figured the old parker was as good as any greener ever built so i tred the 3 ounce load...its a big load but is a bit rough on the shoulder in the parker at 13 lb but is not bad in the old loomis at 15 lbs...theres one company even now loading the 3 12 inch 10 mag with 3 oz of shot but they have only a muzzle velocity of only around a 1000 fps...but as been said on this forem many times the lighter the powder and load the longer that old shoulder and guns gonna last.... charlie

Charlie I think your talking about Nitro ammo company. They load a 3 oz 10 ga load its a blend of lead and heavishot.I heard it only puts about 150 in a 10" at 40 yards. 3 oz in a 10 ga probably has like a 30-50ft shot string policy