Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   DH 3 frame 12 gauge (https://parkerguns.org/forums/showthread.php?t=46846)

Brian Hornacek 07-11-2026 07:59 AM

DH 3 frame 12 gauge
 
Good morning Parker friends.

A friend of mine picked up this nicely restored 3 frame, DH, 12 gauge with 32 inch barrels #97468. Any information on 3 frame 12 gauges would be of interest to me. I know they’re not common but they are out there.

Regards.

Brian Hornacek 07-11-2026 08:06 AM

3 Attachment(s)
Photos

Craig Larter 07-11-2026 11:59 AM

1 Attachment(s)
3 frame 12ga Parkers are uncommon but a great waterfowl gun every bit as capable as a Super Fox in my opinion. I own CHE 32" example. Had it out hunting geese on the Platte river last year shooting Kent TM 1 3/8oz shells

Steve Huffman 07-11-2026 12:09 PM

I picked up a PH wreck 3 frame 12 and put the barrels on a Ph 3 frame that was a 10 now it goes both ways.

Dave Noreen 07-11-2026 12:31 PM

Very nice. I checked the Home Page Research Letters pick and there are records available on 97468 for a PGCA letter. Might be interesting to see if it was ordered with long chambers.

CraigThompson 07-11-2026 02:45 PM

I had three 3 frame 12’s at one point . A 32” DH , 32” VH and a factory 28” DH .

Rick Roemer 07-11-2026 02:54 PM

1 Attachment(s)
I love my 3 frame DHE 12. I use it for waterfowl and occasional clays. It's a beast. I would love to find a set of 10 gauge barrels to make composed set. Your friend's looks very nice.

Bill Murphy 07-11-2026 03:53 PM

Rick, I was looking for a set of #3 frame barrels for a gun in my collection and bought every nice condition #3 frame ten gauge Damascus gun I could find until I found a set of barrels that would fit my gun. I found a nice one, but now I can't even remember what gun I was searching for barrels for. But now I own way more #3 frame ten gauges than I will ever shoot. This whole Parker collecting sickness is yes, a sickness.

Dean Romig 07-11-2026 06:13 PM

I don’t think I’m even close to catching up wuth you Bill…





.

Bill Murphy 07-12-2026 09:41 AM

I bought a high condition #3 frame BH with cut off Damascus barrels and a less than acceptable restock. I couldn't resist it because it is a Worlds Fair gun, loaded up with original color. I remembered that a vendor at a not so recent show had a set of #3 frame ten gauge Titanic Steel barrels with forend. I located that vendor at the Baltimore Show a couple of years later and he still had those barrels. They are now on my BH without any gunsmithing. They are not #3 frame 12 gauge barrels, but they are still a great outfit.


All times are GMT -4. The time now is 06:56 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Parkerguns.org