![]() |
Model 1878 Parker ID Help and FMV
26 Attachment(s)
Long Time Listener First Time Caller: SN31030
Came across this Parker during an estate appraisal. G Grade, 10 Gauge? Looks to be a #3 Frame. Barrels measure 32", dark bore. Tight quarters was hard to get any decent detail images. I will send off for a letter Monday. Thanks In Advance |
Grade 2[G] Hammer and yes 3 frame and 10 gauge
|
How far down the barrels is that dent (hole )?
|
Added one more photo, the dent/hole looks to be 1/2 way down the barrel.
|
That little dent looks like a big problem.
|
The number on the barrel flat does not match the number on the water table, replacement barrels set? Is there another number on the barrel set that matches that on the frame? That dent/hole is a shame on that old thunder stick.
|
I believe those numbers are the order number for these early shotguns, perhaps the other numbers I am unsure of. It sure seems like these barrels have been on this shotgun for a long time, I need to probably get another good look at the barrel. Is there a location for the antique ones I should be looking for?
|
That number stamped on the right barrel flat most definitely is the order number, Not the serial number.
. |
The serial number on Parker barrels is stamped on the left side of the barrel lug, close to the bottom of the left barrel. Yup, the other number is the order number.
|
All times are GMT -4. The time now is 09:15 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org