Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Damascus Barrels & Steel (https://parkerguns.org/forums/forumdisplay.php?f=31)
-   -   Iron count (https://parkerguns.org/forums/showthread.php?t=4299)

Jeff Bonadurer 05-10-2011 10:59 PM

Iron count
 
Howdy All,

Just curious how many iron damascus these barrels are?

[IMG]http://farm4.static.flickr.com/3142/...2bb0bfb5_b.jpg
IMG_4373 by Bonadurers, on Flickr[/IMG]

Best regards,

Jeff

Dean Romig 05-10-2011 11:12 PM

That's a tough one Jeff but it looks like one-iron crolle.

The grade 2 Parkers had two-iron crolle to the best of my knowledge, and the grade 3 and 4 Parkers had three-iron crolle.

What gun are those barrels from?

Drew Hause 05-11-2011 10:35 AM

Nice D3 (3 Iron) probably from a G (Dam2). See Frank's thread below and https://docs.google.com/Doc?id=dfg2hmx7_268gzhjpd4d
Hammerless Ds had mostly 4 Iron, Cs mostly Bernard (sourced from Belgium) and 4 Iron.

3 Iron = 2 full scrolls between 2 1/2 scrolls within the ribband weld lines
https://docs.google.com/Doc?id=dfg2hmx7_0dgmfqfgm

Dean Romig 05-11-2011 03:21 PM

Dang it - I'm wrong again :banghead:

Drew, It looks to me like every line is a weld line... how do you see it differently?

Drew Hause 05-11-2011 06:03 PM

This is an Oxford or Hufnagel variant called Ferlacher Rosen

http://pic20.picturetrail.com:80/VOL.../331848005.jpg

It's almost impossible to 'read' the ribbands as a weld line is down the middle of each scroll (each scroll being two halves of adjacent rods.)
BUT as you can see on Jeff's barrels, the scroll where the edge of the ribband is 'jumped' (overlapped) and hammer welded is 1/2 the size of the full scrolls - so you look for two full scrolls in between two 1/2 scrolls = 3 iron :rolleyes:
AND the size of the scrolls (depending on the pattern) helps i.e. 4 Iron scrolls are smaller than 2 Iron scrolls, but Turkish scrolls are smaller than Oxford scrolls, unless it's Super-Oxford :)

charlie cleveland 05-11-2011 10:22 PM

im gonna leave the counting to you guys.. charlie

Keith Parrish 05-12-2011 11:31 PM

ME TOO!! I'M WITH CHARLIE!! Just know them some beautiful peices of work...

Jack Cronkhite 05-13-2011 10:11 AM

I'm glad you are out there Drew. I can read your words but I think I need to take a course to understand them. No matter what, they are beautiful barrels that we can appreciate. I know I would appreciate driving the current world's fastest production car, the Bugatti Veyron Super Sport, without fully understanding its mill (I think it is DamFast2) Not TurkishCrawl
Cheers,
Jack
http://theluxury.org/wp-content/uplo...uper-Sport.jpg
http://upload.wikimedia.org/wikipedi...swagen_W16.jpg


All times are GMT -4. The time now is 08:57 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org