Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Hammer Guns (https://parkerguns.org/forums/forumdisplay.php?f=14)
-   -   Parker produced Laminated Barrels (https://parkerguns.org/forums/showthread.php?t=42222)

Stan Hoover 07-02-2024 08:51 AM

Parker produced Laminated Barrels
 
Had a question that I was rolling around in my mind,

Of course I could research the TPS, but I thought, it would be easier to just ask

Furthermore it has been a little slow around here, not sure where everyone is hiding:cool:

Does anyone own or recall seeing and 8 gauge with Parker produced Laminated barrels:corn:

Thanks,
Stan

Dean Romig 07-02-2024 09:50 AM

I have not, though I have seen them in 10 gauge, 12 and 16 gauge. I have a 12 D-grade and a 16 D-grade.





.

Stan Hoover 07-02-2024 09:58 AM

Thanks Dean,

I was dreaming of 8 bore through 20 gauge with beautiful Laminated barrels:rolleyes:

The search continues

Stan

Dean Romig 07-02-2024 10:04 AM

The Very Best of Luck to you Stan. I sincerely hope you attain that goal!!





.

edgarspencer 07-02-2024 10:24 AM

As I recall, one of our members has a grade 2, 20ga gun with Laminated barrels. I can not recall if it was a lifter or top lever.
Only because my TPS was at arms length away, I looked, and saw there were a few Grade 1 and 2 8ga guns with Laminated barrels.

Arthur Shaffer 07-02-2024 10:58 AM

I have a 12 ga G grade and a 10 ga D grade. Breck is redoing the barrels of the 12 ga now. He previously did the 10 ga barrels.

Dean Romig 07-02-2024 11:01 AM

Quote:

Originally Posted by edgarspencer (Post 413223)
As I recall, one of our members has a grade 2, 20ga gun with Laminated barrels. I can not recall if it was a lifter or top lever.
Only because my TPS was at arms length away, I looked, and saw there were a few Grade 1 and 2 8ga guns with Laminated barrels.

Were the serial numbers of those guns in the range (later 1877, 1878, and early ‘79) where they might have been Parker-made barrels?
My 16 gauge D-grade is an 1881 so they may have had a few sets of Parker-made Laminated Steel barrels still in inventory.





.

Stan Hoover 07-02-2024 12:25 PM

Quote:

Originally Posted by edgarspencer (Post 413223)
As I recall, one of our members has a grade 2, 20ga gun with Laminated barrels. I can not recall if it was a lifter or top lever.
Only because my TPS was at arms length away, I looked, and saw there were a few Grade 1 and 2 8ga guns with Laminated barrels.

Thanks Edgar,

Now to find one, that will/would be a find. The 20 gauge end is covered, now we need to find a 10 gauge and find the highest grade affordable in other gauges and an 8 bore.

Arthur Shaffer 07-02-2024 12:27 PM

I am just ryig to remember and may well be wrong, but I thought TPS stated that they were not used on Gr 1 guns. Of course, they also were supposedly not used on highere grade guns, but I have seen several. I always believed they were used somewhat interchangeably with damascus because Parker likely had a high opinion of their in house composite barrels. The D grade 10 gauge I have is listed as Damascus in the serialization book but has original Parker Laminate barrels. I have read of others similarly listed.

Dean Romig 07-02-2024 12:39 PM

The majority of the ones I have seen lettered as Damascus barrels... even the two that I own.





.


All times are GMT -4. The time now is 09:32 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org