Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   GH 20 ga. with 26" Damascus barrels (https://parkerguns.org/forums/showthread.php?t=3872)

Gary Cripps 03-17-2011 06:51 PM

GH 20 ga. with 26" Damascus barrels
 
Have in hand this evening a GH hammerless 20 ga. ser. # 133968 with Damascus 26" barrels. When looking this gun up in The Parker Story this evening it seems to tell me on page 279 that none were made with Damascus barrels in 26". The barrels don't appear to have been cut. Is there some place else in the book I can find additional information?

Thanks, Gary Cripps

E Robert Fabian 03-17-2011 06:58 PM

Garry, your gun checks out in the serialization book D2 26" barrels
Grab it.

Bill Murphy 03-17-2011 07:11 PM

The Parker Story estimates of G grade 20 gauge hammerless Damascus barrel gun production is in error. Maybe someone can provide us with the "errata" entry for that part of the book. These guns are scarce, but not as rare as the book would have us believe.

Dave Noreen 03-17-2011 07:34 PM

The real numbers that should be in the Dam2 20-gauge column (length/count) - (32/3), (31/1), (30/49), (28/244), (27/3), (26/145), and (24/1) for a total of 446 Damascus barrel 20-gauge GH-/GHE-Grades.

Gary Cripps 03-17-2011 07:58 PM

That puts things in perspective. Didn't think I could find one of a kind.
Thank you very much for the information.
Gary Cripps

Bill Murphy 03-18-2011 07:23 AM

Researcher, are the "eratta" pages still available for TPS? How do we access a copy?

Dave Suponski 03-18-2011 11:08 AM

Bill, I could copy my set and mail them to you if you like.

Rich Anderson 03-18-2011 11:47 AM

I just picked up a GHE 20 Damascuss with 26 inch bbls. Its haveing some stock work done and I don't remember the serial number but it seems to me it was from the early 1900's.

Dave Noreen 03-18-2011 01:01 PM

I tried the web address that was in the upper corner of some of mine, and no joy!! There is some errata for volume I on page 1043 and 1044 in Volume II.

Phillip Carr 07-04-2011 12:12 PM

Cab anyone tell me how many GH 20 gauges had Twist steel barrels?


All times are GMT -4. The time now is 02:40 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org