Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Reproductions (https://parkerguns.org/forums/forumdisplay.php?f=22)
-   -   Single trigger problems (https://parkerguns.org/forums/showthread.php?t=3529)

Jim Beilke 02-08-2011 06:56 PM

Single trigger problems
 
Has anyone had problems with the reproduction single trigger doubling or not firing the second barrel? My gunsmith told me the older reproductions had some problems

Mike Shepherd 02-08-2011 07:44 PM

The almost standard answer here is that after cleaning they work fine. I had one with a single trigger, had a problem, had it cleaned, and it work fine.

Send it to a smith who is know for working on Parker Single Triggers.

Best,

Mike

Jim Beilke 02-08-2011 09:05 PM

trigger
 
Thanks Mike that is good to know. JIm

Bob Jurewicz 02-08-2011 09:07 PM

Jim,
And some can never be made to work right!
Bob Jurewicz

Jim Beilke 02-08-2011 09:17 PM

trigger
 
That is discouraging. Aren't they the same single trigger as the original Parkers? Jim

Harry Collins 02-08-2011 09:35 PM

My VH 16 gauge has a Miller single trigger. I spent $350+- to have it work. It was returned with bushings for the two tang screws. I was told that most single trigger problems were related to tension between the tang and floor plate. Great advice, however it did not stop my 16 from doubling when the left barrel was selected to fire first. I have removed the bushings and tried every combination of tightening and loosening the screws. No luck. I would check that your two tang screws are indexed. It must have worked from the factory!!!!????

Harry

Richard Skeuse 02-09-2011 09:17 AM

Single trigger problem
 
Jim do you have a parker repro with a single trigger problem? Clay Target Sports in Princeton,N.J. can fix it. Phone number is 609-921-9358. Ask for Chris. I have passed this info on to this site but I guess no one keeps a file of this helpful info. Thanks guys

Paul Ehlers 02-09-2011 11:42 AM

Here's a personal experience I'll share with you.

I've had two friends that have had repro single trigger singleing problems. Two different guns, two different trips but the same problem. In both cases we were in North Dakota pheasant hunting and the weather was cool let's say 32f & the guns had been working fine when the temp's were warmer.

I always carry some basic gunsmithing tools with me on trip's. So in the evening I pulled the trigger plates off of these guns and determined that the original lubrication oil had turned to varnish over the years. All it took to get the triggers back in action was to spray the trigger mechanism with some break kleen to dissolve the old oil and then lube them with some lite oil.

Here's my take on the repro's right or wrong.


Even the newest of the repro's are going on twenty years old now. That means the factory lubrication is also twenty years old. One of the unfortunate facts about most lubricants is they have properties in them that evaporate and the oil turns to varnish. So even if you have a new unfired repro it could have lubrication problems if you were to start shooting it. If you haven't done it yet, you should have your repro dis-assembled, properly cleaned & lubed so you can have a long lasting reliable gun.

I'm seeing more and more posts on the different sites about repro single trigger problems and I wonder if most of them are caused by lubrication issues. These issues could be either as I found with dried out lube gumming things up or possibly the lack of lube wearing out or galling fine fit parts.

Just some food for thought based on my experiences!

Steve Parker 02-10-2011 12:08 PM

I had a reproduction that had a doubling problem. I was referred to Heritage Gunsmith, 740-625-6131. They handled many of the reproduction repairs for Jaques, who was a primary distributor of the reproductions. I have had no problem since.

John Dallas 02-10-2011 01:10 PM

A friend of mine had similar problems with a Winchester 101 20 gauge which had obviously been stored for years. Same vintage, same factory (?) same lubrication (?). We cleaned his and it works perfectly


All times are GMT -4. The time now is 03:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org