Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   Parker Roll Pin Question (https://parkerguns.org/forums/showthread.php?t=32939)

Mike Koneski 03-31-2021 01:47 PM

Parker Roll Pin Question
 
Is there any source for the specs for Parker roll pins? I'm thinking of having some made up but need specs for original dimensions. I know frame sizes make a difference but I might only do popular frame sizes of 1, 1 1/2 and 2. If there are any specs on the pins and screws too, that would be great!! This seems to be a simpler fix than the TIG weld and mill. THX.

Eric Estes 03-31-2021 01:50 PM

I believe Brian may stock oversized replacements, ready for fitting.

Harold Lee Pickens 03-31-2021 03:35 PM

I do believe he does.

Dean Romig 03-31-2021 03:49 PM

I think Brian has three different sizes of the roll joint.

Do I know the gun you want to tighten up?


.

edgarspencer 03-31-2021 04:38 PM

It wouldn't be the pin you'd weld up, it would be the joint roll.

Mike Koneski 03-31-2021 05:36 PM

Quote:

Originally Posted by edgarspencer (Post 330820)
It wouldn't be the pin you'd weld up, it would be the joint roll.

You TIG weld the hook and to properly finish it you mill it down.

Mike Koneski 03-31-2021 05:37 PM

Quote:

Originally Posted by Dean Romig (Post 330815)
I think Brian has three different sizes of the roll joint.

Do I know the gun you want to tighten up?


.

Just looking to keep some on hand or have some made. Most of my guns are 1 frames.

edgarspencer 03-31-2021 07:30 PM

Quote:

Originally Posted by Mike Koneski (Post 330798)
Is there any source for the specs for Parker roll pins? I'm thinking of having some made up but need specs for original dimensions. I know frame sizes make a difference but I might only do popular frame sizes of 1, 1 1/2 and 2. If there are any specs on the pins and screws too, that would be great!! This seems to be a simpler fix than the TIG weld and mill. THX.

Quote:

Originally Posted by Mike Koneski (Post 330824)
You TIG weld the hook and to properly finish it you mill it down.

Then why are you talking about welding the roll pin, as you mentioned in your first post?

Mike Koneski 03-31-2021 07:47 PM

Wasn’t referring to the roll pin. Was referring to the hook. I may have been born on a Tuesday but it wasn’t yesterday!! :rotf::rotf:

Chuck Bishop 03-31-2021 07:52 PM

How many shells are shooting that you need spares:eek::shock: Ever hear of grease?


All times are GMT -4. The time now is 02:20 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org