Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Releasing top lever (https://parkerguns.org/forums/showthread.php?t=32880)

Releasing top lever

I posted this on the repair thread but thought it might get better attention here:

"How does one go about releasing the top lever on an original Parker. I guess I am dumb and never thought about as mine are always closed and cased or closed and in the rack."

Thanks

There is a little tab directly below the standing breech. Just push it down with a piece of wood, or other material that will not scratch the metal surface, and the lever should release.

Hold the lever over, push down on the trip and slowly release lever.

Attachment 94772

Right, but the release tab is easier to trip if you hold the lever far to the right while depressing it.

.

Quote:

Originally Posted by Austin J Hawthorne Jr. (Post 330216)

There is a little tab directly below the standing breech. Just push it down with a piece of wood, or other material that will not scratch the metal surface, and the lever should release.

Quote:

Originally Posted by Dave Noreen (Post 330218)

Hold the lever over, push down on the trip and slowly release lever.

Attachment 94772

Quote:

Originally Posted by Dean Romig (Post 330220)

Right, but the release tab is easier to trip if you hold the lever far to the right while depressing it..

Thanks Austin, Dave, and Dean I had in fact tried that and I guess I did not apply enough pressure nor did I relieve tension on the top lever.

All is well now in Whoville.....