Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Reproductions (https://parkerguns.org/forums/forumdisplay.php?f=22)
-   -   Unusual Repro (https://parkerguns.org/forums/showthread.php?t=32814)

Gary Laudermilch 03-19-2021 12:21 PM

Unusual Repro
 
https://www.gunsinternational.com/gu...c716_p1_o6.cfm

A 20 ga 2 barrel set with both barrels 28" choked Q1/Q2 and IC/Mod. And with double triggers to boot.

Greg Baehman 03-19-2021 01:20 PM

If this is the gun you're referring to:

https://www.gunsinternational.com/gu...n_id=101597356

With the added pad it would probably make a nice shooter for someone, but if that someone values originality and wants it as it came from the factory . . . well, then there's a problem. IMO, the IC/M set of barrels have been altered from M/F. Original Parker Reproduction improved cylinder and modified chokes are normally stamped as IMP.CYL and MOD Why is the complete barrel flats totally blued on this set only? Why isn't there a "2" stamped between the barrel lugs of this 2-bbl. set? There are a few other little details that are suspect with this gun as well.

Gary Laudermilch 03-19-2021 01:37 PM

Greg, you are probably right. I did not look at the details as I had no interest in buying. However, somebody liked it as it is sold.

Rex Northen 03-20-2021 09:32 AM

Quote:

Originally Posted by Greg Baehman (Post 329446)
If this is the gun you're referring to:

https://www.gunsinternational.com/gu...n_id=101597356

With the added pad it would probably make a nice shooter for someone, but if that someone values originality and wants it as it came from the factory . . . well, then there's a problem. IMO, the IC/M set of barrels have been altered from M/F. Original Parker Reproduction improved cylinder and modified chokes are normally stamped as IMP.CYL and MOD Why is the complete barrel flats totally blued on this set only? Why isn't there a "2" stamped between the barrel lugs of this 2-bbl. set? There are a few other little details that are suspect with this gun as well.

Yes, agreed. In addition, the LOP with pad is only 14" from the front trigger, so there was quite a bit of wood removed from the stock.

Dean Romig 03-20-2021 10:52 AM

2 Attachment(s)
Something I have never noticed on any of my Repros, though it may have been there, is the W over P stamp - the same as on my Model 90.


.

Bill Murphy 03-27-2021 06:31 PM

The slope at the heel means that quite a bit of wood has to be cut to install a pad on a flat surface. There are ways to get around this and retain length, but the result is usually not too neat.

Gary Laudermilch 03-27-2021 08:22 PM

My original post was aimed more at the barrels than the stock. Assuming this is not original I have yet to see a 20 28" with IC/Mod chokes.

Bill Murphy 03-28-2021 06:43 AM

Same here, but the Skeuses would be happy to honor special orders, although they are scarce.

Chris Travinski 03-30-2021 09:04 PM

The difference between IC/Mod vs. Q1/Q2 is not really worth the cost of a second set of barrels. If one were Mod/Full it would be a more practical set.

Dean Romig 03-31-2021 07:24 AM

I’ve had both in 28 gauge and IMO each has it’s distinct purpose/effectiveness. I have never patterned either but have hunted and shot Skeet with both. The MOD barrel on the 28 really reaches out there. Q1, Q2 and IC have their limits.





.


All times are GMT -4. The time now is 12:22 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org