Parker Gun Collectors Association Forums - Lightening cuts and Parkers Found?

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Lightening cuts and Parkers Found? (https://parkerguns.org/forums/showthread.php?t=3132)

Josh Loewensteiner

12-31-2010 09:59 AM

Lightening cuts and Parkers Found?

Just wondering, for Parkers Found, what is the earliest serial number we can find on a gun with lightening cut in the watertable? It's got to be somewhere prior to the 40k serial range, I would guess.

Robin Lewis

12-31-2010 11:13 AM

I have one in the 15k range.

Josh Loewensteiner

12-31-2010 11:25 AM

Robin- Holy Smokes! I think we have that one listed, but we should also add it as the earliest with Lightening cuts and see what else surfaces? 1556x, right?

Robin Lewis

12-31-2010 12:18 PM

yep

Austin W Hogan

12-31-2010 05:56 PM

Lightening Cuts

Check with Jim K; I think his early 20 may have milled grooves in both water table and fore end iron; my similar 17448 does.

Best, Austin

Travis Newman

12-31-2010 06:15 PM

lightening cuts

I have 14290 and they are just in the water table.

James T. Kucaba

12-31-2010 10:16 PM

Quote:

Originally Posted by Austin W Hogan (Post 31258)

Check with Jim K; I think his early 20 may have milled grooves in both water table and fore end iron; my similar 17448 does.

Best, Austin

My 20ga lifter gun is Serial Number 10165 and it does have lightening slots milled into the water table but not in the fore end iron.

Jim Kucaba ... AriZOOna Cactus Patch ... Email: JimKucaba@aol.com

Austin W Hogan

01-01-2011 08:06 PM

Fore End Iron Lightening Cut

2 Attachment(s)

The cut is on the underside of the fore end iron, covered by the splinter

Best, Austin

Rich Anderson

01-02-2011 10:37 AM

Number 13011 is a 16ga Lifter with the lightening cuts in the watertable. I'm not takeing the forend iron off to look there:nono:

Eric Eis

01-02-2011 12:46 PM

Quote:

Originally Posted by Richard Anderson (Post 31391)

Number 13011 is a 16ga Lifter with the lightening cuts in the watertable. I'm not takeing the forend iron off to look there:nono:

Good Boy Rich as you know you are not allowed to play with screwdrivers....:rotf: Eric

All times are GMT -4. The time now is 08:49 AM.