Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   When did this design change happen (https://parkerguns.org/forums/showthread.php?t=2646)

Patrick Lien 10-19-2010 06:05 PM

When did this design change happen
 
2 Attachment(s)
I am curious when this design change to the top lever spring was made. Picture #1 is from 111,000 and picture #2 is from 208,000.

thanks
Patrick

Dave Suponski 10-19-2010 06:16 PM

Pat, The new coil top lever spring was put into use in 1918 and it was first used in #2 frame Trojan grade gun's. Gradually being phased into all other grades and frame sizes. Right around serial number 176xxx if I remember right.

Patrick Lien 10-19-2010 06:21 PM

Thanks Dave

Bill Murphy 10-19-2010 07:06 PM

Patrick, guys like me can't understand anything we are looking at in the pictures because the parts in one picture aren't included in the other. Congratulations on getting answers to your inquiries, but I sometimes suspect that answers to questions with incomplete information are also "incomplete answers". I personally don't understand much of what I see. As always, I appreciate the effort.

Dave Suponski 10-19-2010 07:17 PM

Bill, I believe Pat was asking when the change from leaf spring top lever to coil spring top lever was instituted by Parker Bros. The gun pictured at the top is a double trigger gun while the bottom picture is a single trigger gun. I hope this helps to clarify things....:)

Patrick Lien 10-19-2010 07:32 PM

Quote:

Originally Posted by Bill Murphy (Post 26154)
Patrick, guys like me can't understand anything we are looking at in the pictures because the parts in one picture aren't included in the other. Congratulations on getting answers to your inquiries, but I sometimes suspect that answers to questions with incomplete information are also "incomplete answers". I personally don't understand much of what I see. As always, I appreciate the effort.

Bill,
I should have remembered that you have never taken a gun apart and would be confused as to what a top lever spring is...........:confused: Please call Suponski and have him explain it to you.

Patrick :bigbye:

Jim Akins 10-19-2010 07:51 PM

One thing I would like to observe; the changes on the lower gun did not not happen together. I have seen guns with with either the coil spring and the original lever arrangement or the v spring and the one piece lever. It has been years and I can't remember which.

Jim A.

Patrick Lien 10-19-2010 08:03 PM

1 Attachment(s)
Quote:

Originally Posted by Jim Akins (Post 26158)
One thing I would like to observe; the changes on the lower gun did not not happen together. I have seen guns with with either the coil spring and the original lever arrangement or the v spring and the one piece lever. It has been years and I can't remember which.

Jim A.

Jim,
That sent me back to check a gun in between the first two. This is from 157,000 gun and is again different from the first two.

thanks
Patrick

Dave Suponski 10-19-2010 08:28 PM

Very interesting Pat. A leaf spring and short top lever. I would love to see how that mechanism works. Thank's for posing the picture's.

By the way Pat...Is that single trigger a Miller?

Patrick Lien 10-20-2010 01:22 AM

Quote:

By the way Pat...Is that single trigger a Miller?
Dave,

Good eye, the second picture in my original post is a gun with a Miller trigger.

Patrick


All times are GMT -4. The time now is 05:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org