Keel thickness
 

Generally what's the thickness of the keels in a set of Parker barrels ?

Considering the fact that most keels were triangular in cross-section and the fact that different gauge barrels had different radii and the fact that there are a few different rib widths and tapers.... there is no single answer.





.

I'm asking how far from the muzzle do they go back generally . I mean is it a 1/4" , 1/2" , an inch or more ?

The one I saw was about a 1/4 if my mind is right

Generally they are from about 1" to about 1.5" and several keels are spaced along the rib.





.

This question is answered in the FAQ page.

I have pulled apart a lot of Parker barrel sets and usually the fitted and dressed muzzle keel is around an inch and is a triangular wedge shape. The rearward spacers between the tubes (there are typically 3, give or take) can be solid blocks or be a few stacked up layers.

Here is a picture of one: http://parkerguns.org/pages/faq/BarrelKeels.htm