Parker Gun Collectors Association Forums - Help with a frame size stamp

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Help with a frame size stamp (https://parkerguns.org/forums/showthread.php?t=22005)

Craig Larter

08-09-2017 06:25 PM

Help with a frame size stamp

1 Attachment(s)

I asked this seller for a picture hoping this 32 inch v was a 3 frame. Never seen 12 stamped. The gun weights
can anyone help.

Chuck Bishop

08-09-2017 06:41 PM

It's the ultra rare 12 frame:rotf::rotf:
Seriously, it's probably a 1 1/2 frame. Not uncommon to see the gauge on the lug in later year guns

edgarspencer

08-09-2017 06:51 PM

Quote:

Originally Posted by Chuck Bishop (Post 222832)

Not uncommon to see the gauge on the lug in later year guns

Not Uncommon? I'd say it's pretty common.

Jim DiSpagno

08-09-2017 07:02 PM

Ask the seller to measure distance between firing pins center to center. That measurement will give you the frame size from the chart in the TPS or the serializationbook

Chuck Bishop

08-09-2017 07:06 PM

Edgar, my daughter says to stop being a smart ass:whistle:

Rick Losey

08-09-2017 09:03 PM

Quote:

Originally Posted by Jim DiSpagno (Post 222835)

Ask the seller to measure distance between firing pins center to center. That measurement will give you the frame size from the chart in the TPS or the serializationbook

agreed - it would be the only way to be sure

Dean Romig

08-09-2017 09:41 PM

4 lbs., 8 oz. makes it a 2 frame in my experience.

.

Craig Larter

08-10-2017 05:59 AM

Ok thanks the gun weights 8-2 so I was thinking it is close to a 3 frame. I have a 32 inch 3 frame 12 that is 8-4. The search continues.

All times are GMT -4. The time now is 10:09 PM.