Info on old parker needing parts
 

I have an old hammer gun that I was left by my father. SN 48228 leads me to conclude it is a 1886 12 ga., grade 1 with "Twist" barrels (they have been cut). All numbers match. It is in need of a correct left hammer, both hammer screws, 2 firing pin springs, and the flat trigger spring that hold the triggers in place. The stock was very broken up as it mounted to the receiver and I did an amateurish epoxy of the broken stock pieces and have been able to reassemble the stock to the receiver. it cocks and will fire I think. My question is two fold: Are the parts available at a reasonable price to make it complete ; or do I have a parts gun? It has little bluing left but is clean of rust.

Check with Brian Dudley. He will probable have what you need. You can PM him on this forum or just click on his name on one of the threads and I think you will find a contact no.

Thank you I will give it a try.