Domino Effect
 

So we are having A tile floor put down in our home. The two gentleman installing it noticed my "parker gun" sticker on the back of my truck. Each of them have a 10ga for sale. The one i have not seen must be pretty nice with a 1500 asking price. The other not so much as you can tell by the photos.

I would appreciate your expert opinions and what you think the value would be for the one in the photos. Barrels are laminated steel and measure a little over 32". There is a lot of surface rust.

the serial number lists as a grade 1 10 with 32 inch laminated barrels, what are the bores like?

the forend is obviously rough - is the stock missing? or just not in the pictures

the cost of replacing the wood, unless you find a take off- may preclude this being a practical project


as for the other- price and condition/quality are not always in line

They owners says he cant find the stock but will look for it. The gun belonged to his great grandfather. The bores are rusty and looks pitted. I would like to run a brush thru them to tell a little more but haven't yet.

with no stock your probably looking at a good parts gun or look on ebay for a stock to show up...pretty much a 150 dollar gun...

Less than 1500

i don't think we have seen the 1500 one yet

We sure haven't. I was talking about the one pictured.

as soon as I get pics of the other one i will post.

Of course, you are doing pretty well, as all I ever got from my floor man was about 10 missed appointments and a big ole bill. You are looking at not one, but two, Parkers and the other one could be a good one.