Parker First Range Report. (Lots Of Pics.)
 

The Range.
http://i99.photobucket.com/albums/l3...ternTest01.jpg


The Turkey head Target at 40 Yards.
http://i99.photobucket.com/albums/l3...ternTest02.jpg


Looking Back 40 Yards From Target To shooting Position.
http://i99.photobucket.com/albums/l3...ternTest03.jpg


The PVC Frame & Target.
http://i99.photobucket.com/albums/l3...ternTest04.jpg


First Shot, Left Barrel, 3 ¼ Dram 2F Black Powder, 1 3/8 oz. 7.5 Shot.
Heavy Load, Kicks Like A Mule In A 6 lb. 13 oz. shotgun.
http://i99.photobucket.com/albums/l3...ternTest05.jpg


Second Shot, Right Barrel, Same Load As Above. “OUCH”
http://i99.photobucket.com/albums/l3...ternTest06.jpg


First And second Shots Above Together Under Lights. Two Dead Turkeys At 40 Yards.
http://i99.photobucket.com/albums/l3...ternTest07.jpg


Much Lighter Load, First Shot, Left Barrel, 2 ¾ Dram 2F Black Powder, 1 1/8 oz. 7.5 Shot. These I Could Shoot All Day With No Problem.
http://i99.photobucket.com/albums/l3...ternTest08.jpg


Second Shot, Right Barrel, Lighter Load As Above.
http://i99.photobucket.com/albums/l3...ternTest09.jpg


First And Second shots Above Together Under Lights. Two Dead Turkeys At 40 Yards.
(Lighter Loads Above)
http://i99.photobucket.com/albums/l3...ternTest10.jpg

I think you're ready Mike. Have you got some birds located and figured out yet? Not much time left you know.

Nines would look even better. However, most turkey "guys" would rather you pattern with sixes for penetration, even in the head. Sixes may look just as good on the target.

certainly enjoyed seeing your patterning photos...I'm shooting a borrowed 32 inch F & F this week down in Jacksonboro...and will try to duplicate your range work @ 40 yards and post the results for comparison...

Good luck opening day...I hope you see him!

http://i7.photobucket.com/albums/y29...oon/turk10.jpg

[QUOTE=Kent Nickerson;15492]certainly enjoyed seeing your patterning photos...I'm shooting a borrowed 32 inch F & F this week down in Jacksonboro...and will try to duplicate your range work @ 40 yards and post the results for comparison...

Good luck opening day...I hope you see him!

Good luck to you as well Kent, and very much looking forward to seeing your results. Will you be using black powder shells as well?

No, I won't...not up to purist yet. Just a wannabe. I have a friend who rolls loads for me...he dissected some RST's and has come up a with a pressure-right duplex load combining 4's and 5's that I'm going to try. I'll post the results or send them to you. Go get that gobbler.