Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Parker barrel samples (https://parkerguns.org/forums/showthread.php?t=14619)

Pat Dugan

10-22-2014 04:09 PM

Parker barrel samples

I don't remember how I got these powered barrel samples from
Parker 121965 and 193525, both left AND RIGHT FROM EACH. I would like to send them to whomever is doing any research on barrels.

Thanks in advance

Pat Dugan pddugan@bellsouth.net

Dean Romig

10-22-2014 05:00 PM

Dave Suponski was asking for barrel samples - you might contact him.

Eldon Goddard

10-22-2014 11:02 PM

I would be interested, but my test will be destructive in nature, if you are ok with that. Unlike chemical composition and metallurgy tests that Mr. Suponski and others are working on my tests will be around mechanical material properties. Like Yield strength, strain at failure, and modulus of elasticity. I already have a set of Damascus barrels from a E grade 10 gauge that I will be using in my studies as soon as I get the equipment together.

Pat Dugan

10-23-2014 01:19 AM

My sample is powered metal that some one has ground up., 4 samples

Eldon Goddard

10-23-2014 09:33 AM

I understand I was wondering what you meant by powdered barrel.

All times are GMT -4. The time now is 04:46 PM.